HITBOX MIG Torch Welding Gun Spool Gun 3m 10ft for Welding Machine Aluminum

HITBOX Welder MIG Torch Welding Gun Spool Gun 3m 10ft long cable for TIG ARC MIG. Wire Diameter :Mild Steel 0.4-0.8mm. Stainless Steel :0.6-0.8mm. Changeable Gun Neck : Straight neck/Goose neck.

Rated electrical controlling rate: 24V. Switch off welder power, make the Euro-central connector connect with wire feeder adaptor, and tighten threaded collar. Insert plug into receptacle, and tighten threaded collar.

Installing wire spool Press the button on the spool cover then open it, loose the spool cover fixing screw (levo), slide wire spool to it's shaft, Adjust nut to make it suitable. Push wire through guides into wire feeding roll. Press the trigger after closed the cover, wire feeding roll make the wire into the gun tube.

Adjusting the wire feeding pressure Turn the pressure adjusting screw clockwise with hand, the pressure will increase, otherwise it will decrease. Adjusting the wire feeding speed Turn the wire feeding speed adjusting knob clockwise, the speed will increase, otherwise it will. Item Processing Time: The processing time for a specific order varies with the product type and stock status. All our item offer 7 days return peroid, defective or non-defective. Return must include all original package and accesorries, item must in good condition.

If you have any issue, you can just give us a message, and we give you full resolve. Please be patient when contacting us, all messages will be replied within 24 hours.

Please let us know immediately if a package is damaged upon arrival.

---